Marindec PaintsIndustrial Paint for Factories & Manufacturing
On a production line, paint has to dry fast, apply consistently batch after batch, and suit the way you apply it: brush, spray or dip. Marindec manufactures fast-dry primers and enamels for OEMs, fabricators and factories, with spray and dipping grades in 200L drums.
Products by application
| Application | Product | Key figures (TDS) |
|---|---|---|
| Primer on fabricated steel | FPW15 Fast Dry Primer; spray and dipping grades | 20–35 µm; touch dry ~10 min; overcoat within 2 h |
| Finish coat on products and machinery | Fast Dry Enamel in SANS and RAL colours | 20–45 µm; touch dry ~10 min; suitable for dipping |
| Textured finish that hides surface marks | Hammertone | 25–35 µm; touch dry ~15 min |
| Ovens, heaters, exhausts | Heat Resistant Aluminium | Continuous dry heat up to 400°C |
| Aluminium and non-ferrous parts | EPS15 Etch Primer | 10–15 µm; self-etching; overcoat after 1 h |
| Premium exterior finish | 2K Polyurethane | 35–45 µm; very good weathering |
Keeping the line running
- Use the matched thinner for viscosity and gun cleaning. See which thinner to use.
- Recoat fast-dry enamels within the window. Outside it they can wrinkle.
- Hold colour consistency across batches by ordering larger runs in 200L drums.
- Strip rejects with Paint Remover and clean metal with Armourphos Cleaner.
Inside the factory
For the building itself: Floor & Stoep paint for floors and walkways, Type 2 road marking paint for demarcation lines, and anticorrosive systems for structural steel.
Request a quote with the equipment or area, the environment and the volume. Quotes usually come back the same working day.