Products / Specialty Coatings

49-201-005 · 5L
SKU49-201-005
Pack sizes5L
System roletopcoat
Substratesmetal
Environmentsindustrial, high temp
Dry timetouch ± 8 hours
Coverage4.5 m²/litre @ 20 µm DFT theoretical; practical 50 to 70% less
Volume solids± 9%

Heat Resistant Spray — Aluminium 5L

Marindec Product Assistant

We need to repaint steel exhaust pipes and a chimney that run hot. What do we use?

This heat-resistant spray coating offers exceptional durability and corrosion resistance while preserving aesthetics, making it ideal for industrial heating and thermal technology applications.

Technical data

From the Marindec technical data sheet for Armour High Heatresist 540 aluminium silver (49-201), TDS 1/140419. Drying and overcoating times vary with ambient temperature.

TypeReady to use, low build, slow drying, single pack based on high temperature resistance silicone resin
Recommended film thickness15 to 25 µm DFT
Theoretical spread rate4.5 m²/litre @ 20 µm DFT
Practical spread rate50 to 70% less than theoretical, depending on substrate & application conditions
Solids by volume± 9%
Touch dry @ 23 °C± 8 hours
Overcoating interval± 36 hours
Temporary handling & transport± 24 hours
Heat resistanceContinuous dry heat resistance up to 540 °C
BakingFull properties develop only after baking & reaching operating temperatures; bake minimum 45 minutes at 250 °C
Recommended undercoatNot recommended
Recommended thinnerFDE Thinner for cleaning
ThinningNot recommended
Application
  • Air spray: preferred (thinning not recommended)
  • Airless spray: suitable (thinning not recommended)
  • Brush / roller: suitable (thinning not recommended)
  • Dipping: not recommended
Substrate conditionsDry and free of any dirt, dust or oily residues; at least 3 °C above dew point; clean sufficiently by sandblasting or with sandpaper

Heat resistance: 540 °C for this aluminium grade (Marindec technical team, 2026-10-19). The data sheet's body text still says 400 °C, the figure for Heat Resistant Black; Marindec is correcting it.

Datasheets

  • SDSSafety data sheet (PDF)
  • Coming soon

    Technical data sheets are moving to a free sign-up

    Soon you'll unlock every Marindec datasheet with one quick sign-up. Until then, contact us and we'll send you the technical data sheet for Heat Resistant Spray — Aluminium 5L.

Frequently asked questions

What is Heat Resistant Spray — Aluminium 5L used for?

This heat-resistant spray coating offers exceptional durability and corrosion resistance while preserving aesthetics, making it ideal for industrial heating and thermal technology applications.

Which surfaces can Heat Resistant Spray — Aluminium 5L be applied to?

Suitable substrates include metal.

What thinner should I use with Heat Resistant Spray — Aluminium 5L?

Per the Marindec technical data sheet: FDE Thinner for cleaning.

What film thickness should Heat Resistant Spray — Aluminium 5L be applied at?

The technical data sheet recommends 15 to 25 µm DFT.

How quickly does Heat Resistant Spray — Aluminium 5L dry?

Per the Marindec technical data sheet: touch dry ± 8 hours at 23 °C. Drying times vary with temperature and film thickness.

What coverage does Heat Resistant Spray — Aluminium 5L give?

The Marindec technical data sheet gives a theoretical spread rate of 4.5 m²/litre @ 20 µm DFT. Practical spread is 50 to 70% less than theoretical, depending on substrate & application conditions.

What pack sizes are available?

Heat Resistant Spray — Aluminium 5L is supplied in 5L.