Products / High Build Anti-Corrosive Enamels

45-101-025 · 25L
SKU45-101-025
Pack sizes25L
System roletopcoat
Substratesmetal, previously painted
Environmentsexterior, industrial
Dry timetouch ± 10 to ± 30 minutes (depending on applied WFT) · hard ± 3 to ± 16 hours (depending on applied WFT)
Coverage8.00 m²/litre @ 40 µm DFT theoretical; practical 50 to 70% less
Volume solids± 32% (depending on colour)

Fast Dry High Build AGRIP30+ — White 25L

Marindec Product Assistant

We want one product that primes and finishes our steel, without a separate primer coat.

This high build anti-corrosive enamel delivers exceptional durability and aesthetic appeal, ensuring longevity in challenging environments.

Technical data

From the Marindec technical data sheet for Armourgrip Plus 30 premium fast dry primer & finishing enamel (45 series), TDS 3/161103. Drying and overcoating times vary with ambient temperature.

TypeMedium hi-build, fast drying, single pack primer & finishing enamel based on modified acrylate resin with environment friendly anti corrosive MZAP additive
Recommended film thickness20 to 45 µm DFT (100 to 150 µm WFT)
Theoretical spread rate8.00 m²/litre @ 40 µm DFT
Practical spread rate50 to 70% less than theoretical, depending on substrate & application conditions
Solids by volume± 32% (depending on colour)
Touch dry @ 23 °C± 10 to ± 30 minutes (depending on applied WFT)
Hard dry @ 23 °C± 3 to ± 16 hours (depending on applied WFT)
Overcoating intervalWithin 2 to 3 hours
Recommended undercoatNot required, unless for higher DFTs: ZPPW50 Primer or Universal Under Coat 45
Recommended thinnerFD / QD Thinner for viscosity adjustment and for cleaning
Application
  • Airless spray: preferred (thinning not recommended)
  • Air spray: suitable (if required, thin maximum 10%)
  • Brush / roller: suitable for small areas only (if required, thin maximum 15%)
  • Dipping: suitable (reduce viscosity to ± 20 seconds Ford Cup 4)
Substrate conditionsDry and free of any dirt, dust or oily residues; at least 3 °C above dew point; clean sufficiently by sandblasting or with sandpaper

Datasheets

  • SDSSafety data sheet (PDF)
  • Coming soon

    Technical data sheets are moving to a free sign-up

    Soon you'll unlock every Marindec datasheet with one quick sign-up. Until then, contact us and we'll send you the technical data sheet for Fast Dry High Build AGRIP30+ — White 25L.

Frequently asked questions

What is Fast Dry High Build AGRIP30+ — White 25L used for?

This high build anti-corrosive enamel delivers exceptional durability and aesthetic appeal, ensuring longevity in challenging environments.

Which surfaces can Fast Dry High Build AGRIP30+ — White 25L be applied to?

Suitable substrates include metal, previously painted.

What thinner should I use with Fast Dry High Build AGRIP30+ — White 25L?

Per the Marindec technical data sheet: FD / QD Thinner for viscosity adjustment and for cleaning.

What film thickness should Fast Dry High Build AGRIP30+ — White 25L be applied at?

The technical data sheet recommends 20 to 45 µm DFT (100 to 150 µm WFT).

How quickly does Fast Dry High Build AGRIP30+ — White 25L dry?

Per the Marindec technical data sheet: touch dry ± 10 to ± 30 minutes (depending on applied WFT) and hard dry ± 3 to ± 16 hours (depending on applied WFT) at 23 °C. Drying times vary with temperature and film thickness.

What coverage does Fast Dry High Build AGRIP30+ — White 25L give?

The Marindec technical data sheet gives a theoretical spread rate of 8.00 m²/litre @ 40 µm DFT. Practical spread is 50 to 70% less than theoretical, depending on substrate & application conditions.

What pack sizes are available?

Fast Dry High Build AGRIP30+ — White 25L is supplied in 25L.