Products / High Build Anti-Corrosive Enamels
| SKU | 45-89825-005 |
|---|---|
| Pack sizes | 5L |
| System role | topcoat |
| Substrates | metal, previously painted |
| Environments | exterior, industrial |
| Dry time | touch ± 10 to ± 30 minutes (depending on applied WFT) · hard ± 3 to ± 16 hours (depending on applied WFT) |
| Coverage | 8.00 m²/litre @ 40 µm DFT theoretical; practical 50 to 70% less |
| Volume solids | ± 32% (depending on colour) |
Fast Dry High Build AGRIP30+ — Blue Capri R5019 5L
This coating offers robust protection against corrosion and wear, enhancing durability and aesthetics across manufacturing and construction. Its low VOC formulation provides excellent adhesion, finish and weather resistance.
Technical data
From the Marindec technical data sheet for Armourgrip Plus 30 premium fast dry primer & finishing enamel (45 series), TDS 3/161103. Drying and overcoating times vary with ambient temperature.
| Type | Medium hi-build, fast drying, single pack primer & finishing enamel based on modified acrylate resin with environment friendly anti corrosive MZAP additive |
|---|---|
| Recommended film thickness | 20 to 45 µm DFT (100 to 150 µm WFT) |
| Theoretical spread rate | 8.00 m²/litre @ 40 µm DFT |
| Practical spread rate | 50 to 70% less than theoretical, depending on substrate & application conditions |
| Solids by volume | ± 32% (depending on colour) |
| Touch dry @ 23 °C | ± 10 to ± 30 minutes (depending on applied WFT) |
| Hard dry @ 23 °C | ± 3 to ± 16 hours (depending on applied WFT) |
| Overcoating interval | Within 2 to 3 hours |
| Recommended undercoat | Not required, unless for higher DFTs: ZPPW50 Primer or Universal Under Coat 45 |
| Recommended thinner | FD / QD Thinner for viscosity adjustment and for cleaning |
| Application |
|
| Substrate conditions | Dry and free of any dirt, dust or oily residues; at least 3 °C above dew point; clean sufficiently by sandblasting or with sandpaper |
Datasheets
Frequently asked questions
What is Fast Dry High Build AGRIP30+ — Blue Capri R5019 5L used for?
This coating offers robust protection against corrosion and wear, enhancing durability and aesthetics across manufacturing and construction.
Which surfaces can Fast Dry High Build AGRIP30+ — Blue Capri R5019 5L be applied to?
Suitable substrates include metal, previously painted.
What thinner should I use with Fast Dry High Build AGRIP30+ — Blue Capri R5019 5L?
Per the Marindec technical data sheet: FD / QD Thinner for viscosity adjustment and for cleaning.
What film thickness should Fast Dry High Build AGRIP30+ — Blue Capri R5019 5L be applied at?
The technical data sheet recommends 20 to 45 µm DFT (100 to 150 µm WFT).
How quickly does Fast Dry High Build AGRIP30+ — Blue Capri R5019 5L dry?
Per the Marindec technical data sheet: touch dry ± 10 to ± 30 minutes (depending on applied WFT) and hard dry ± 3 to ± 16 hours (depending on applied WFT) at 23 °C. Drying times vary with temperature and film thickness.
What coverage does Fast Dry High Build AGRIP30+ — Blue Capri R5019 5L give?
The Marindec technical data sheet gives a theoretical spread rate of 8.00 m²/litre @ 40 µm DFT. Practical spread is 50 to 70% less than theoretical, depending on substrate & application conditions.
What pack sizes are available?
Fast Dry High Build AGRIP30+ — Blue Capri R5019 5L is supplied in 5L.