Products / High Build Anti-Corrosive Enamels

45-995254-025 · 25L
SKU45-995254-025
Pack sizes25L
System roletopcoat
Substratesmetal, previously painted
Environmentsexterior, industrial
Dry timetouch ± 10 to ± 30 minutes (depending on applied WFT) · hard ± 3 to ± 16 hours (depending on applied WFT)
Coverage8.00 m²/litre @ 40 µm DFT theoretical; practical 50 to 70% less
Volume solids± 32% (depending on colour)

Fast Dry High Build AGRIP30+ — Green China 25L

Marindec Product Assistant

We want one product that primes and finishes our steel, without a separate primer coat.

This High Build Anti-Corrosive Enamel delivers exceptional durability and UV protection for industries like manufacturing and construction, enhancing aesthetics and lowering maintenance costs.

Technical data

From the Marindec technical data sheet for Armourgrip Plus 30 premium fast dry primer & finishing enamel (45 series), TDS 3/161103. Drying and overcoating times vary with ambient temperature.

TypeMedium hi-build, fast drying, single pack primer & finishing enamel based on modified acrylate resin with environment friendly anti corrosive MZAP additive
Recommended film thickness20 to 45 µm DFT (100 to 150 µm WFT)
Theoretical spread rate8.00 m²/litre @ 40 µm DFT
Practical spread rate50 to 70% less than theoretical, depending on substrate & application conditions
Solids by volume± 32% (depending on colour)
Touch dry @ 23 °C± 10 to ± 30 minutes (depending on applied WFT)
Hard dry @ 23 °C± 3 to ± 16 hours (depending on applied WFT)
Overcoating intervalWithin 2 to 3 hours
Recommended undercoatNot required, unless for higher DFTs: ZPPW50 Primer or Universal Under Coat 45
Recommended thinnerFD / QD Thinner for viscosity adjustment and for cleaning
Application
  • Airless spray: preferred (thinning not recommended)
  • Air spray: suitable (if required, thin maximum 10%)
  • Brush / roller: suitable for small areas only (if required, thin maximum 15%)
  • Dipping: suitable (reduce viscosity to ± 20 seconds Ford Cup 4)
Substrate conditionsDry and free of any dirt, dust or oily residues; at least 3 °C above dew point; clean sufficiently by sandblasting or with sandpaper

Datasheets

  • SDSSafety data sheet (PDF)
  • Coming soon

    Technical data sheets are moving to a free sign-up

    Soon you'll unlock every Marindec datasheet with one quick sign-up. Until then, contact us and we'll send you the technical data sheet for Fast Dry High Build AGRIP30+ — Green China 25L.

Frequently asked questions

What is Fast Dry High Build AGRIP30+ — Green China 25L used for?

This High Build Anti-Corrosive Enamel delivers exceptional durability and UV protection for industries like manufacturing and construction, enhancing aesthetics and lowering maintenance costs.

Which surfaces can Fast Dry High Build AGRIP30+ — Green China 25L be applied to?

Suitable substrates include metal, previously painted.

What thinner should I use with Fast Dry High Build AGRIP30+ — Green China 25L?

Per the Marindec technical data sheet: FD / QD Thinner for viscosity adjustment and for cleaning.

What film thickness should Fast Dry High Build AGRIP30+ — Green China 25L be applied at?

The technical data sheet recommends 20 to 45 µm DFT (100 to 150 µm WFT).

How quickly does Fast Dry High Build AGRIP30+ — Green China 25L dry?

Per the Marindec technical data sheet: touch dry ± 10 to ± 30 minutes (depending on applied WFT) and hard dry ± 3 to ± 16 hours (depending on applied WFT) at 23 °C. Drying times vary with temperature and film thickness.

What coverage does Fast Dry High Build AGRIP30+ — Green China 25L give?

The Marindec technical data sheet gives a theoretical spread rate of 8.00 m²/litre @ 40 µm DFT. Practical spread is 50 to 70% less than theoretical, depending on substrate & application conditions.

What pack sizes are available?

Fast Dry High Build AGRIP30+ — Green China 25L is supplied in 25L.