Products / Enamels

43-101-200 · 200L
SKU43-101-200
Pack sizes200L
System roletopcoat
Finishgloss
Dry timetouch ± 45 to 60 minutes (depending on applied WFT) · hard ± 4 to 8 hours (depending on applied WFT)
Coverage7.5 m²/litre @ 45 µm DFT theoretical; practical 50 to 70% less
Volume solids± 36% (depending on colour)

Transport Enamel — White 200 L

Marindec Product Assistant

We're repainting steel trailer bodies and fleet equipment in white enamel. Which paint?

This transport enamel offers superior durability, corrosion resistance, and aesthetic appeal, enhancing branding while withstanding harsh environments across manufacturing, refrigeration, and transportation industries.

Technical data

From the Marindec technical data sheet for Floor / Stoep Enamel (43 series), TDS 1/170429. Drying and overcoating times vary with ambient temperature.

TypeMedium hi-build, medium drying, single pack gloss enamel
Recommended film thickness35 to 50 µm DFT (100 to 140 µm WFT)
Theoretical spread rate7.5 m²/litre @ 45 µm DFT
Practical spread rate50 to 70% less than theoretical, depending on substrate & application conditions
Solids by volume± 36% (depending on colour)
Touch dry @ 23 °C± 45 to 60 minutes (depending on applied WFT)
Hard dry @ 23 °C± 4 to 8 hours (depending on applied WFT)
Overcoating intervalWithin 3 to 4 hours
Recommended thinnerGP/QD Thinner for viscosity adjustment and for cleaning
Application
  • Airless spray: preferred (thinning not recommended)
  • Air spray: suitable (if required, thin maximum 10%)
  • Brush / roller: suitable for small areas only (if required, thin maximum 15%)
Substrate conditionsDry and free of any dirt, dust or oily residues; at least 3 °C above dew point; clean sufficiently by sandblasting or with sandpaper

Datasheets

  • SDSSafety data sheet (PDF)
  • Coming soon

    Technical data sheets are moving to a free sign-up

    Soon you'll unlock every Marindec datasheet with one quick sign-up. Until then, contact us and we'll send you the technical data sheet for Transport Enamel — White 200 L.

Frequently asked questions

What is Transport Enamel — White 200 L used for?

This transport enamel offers superior durability, corrosion resistance, and aesthetic appeal, enhancing branding while withstanding harsh environments across manufacturing, refrigeration, and transportation industries.

What thinner should I use with Transport Enamel — White 200 L?

Per the Marindec technical data sheet: GP/QD Thinner for viscosity adjustment and for cleaning.

What film thickness should Transport Enamel — White 200 L be applied at?

The technical data sheet recommends 35 to 50 µm DFT (100 to 140 µm WFT).

What should I know before applying Transport Enamel — White 200 L?

Code 43 is one product: Transport Enamel, called Floor/Stoep Enamel when it is applied to floors, so the Floor / Stoep Enamel technical data sheet applies.

How quickly does Transport Enamel — White 200 L dry?

Per the Marindec technical data sheet: touch dry ± 45 to 60 minutes (depending on applied WFT) and hard dry ± 4 to 8 hours (depending on applied WFT) at 23 °C. Drying times vary with temperature and film thickness.

What coverage does Transport Enamel — White 200 L give?

The Marindec technical data sheet gives a theoretical spread rate of 7.5 m²/litre @ 45 µm DFT. Practical spread is 50 to 70% less than theoretical, depending on substrate & application conditions.

What pack sizes are available?

Transport Enamel — White 200 L is supplied in 200L.