Products / Enamels

43-1010-200 · 200L
SKU43-1010-200
Pack sizes200L
System roletopcoat
Finishgloss
Dry timetouch ± 45 to 60 minutes (depending on applied WFT) · hard ± 4 to 8 hours (depending on applied WFT)
Coverage7.5 m²/litre @ 45 µm DFT theoretical; practical 50 to 70% less
Volume solids± 36% (depending on colour)

Transport Enamel+mzap — White 200L

Marindec Product Assistant

We're repainting steel trailer bodies and fleet equipment in white enamel. Which paint?

This enamel coating provides exceptional durability and corrosion resistance, ensuring long-lasting protection against harsh conditions while enhancing aesthetic appeal. It is ideal for manufacturing, transportation, and construction applications.

Technical data

From the Marindec technical data sheet for Floor / Stoep Enamel (43 series), TDS 1/170429. Drying and overcoating times vary with ambient temperature.

TypeMedium hi-build, medium drying, single pack gloss enamel
Recommended film thickness35 to 50 µm DFT (100 to 140 µm WFT)
Theoretical spread rate7.5 m²/litre @ 45 µm DFT
Practical spread rate50 to 70% less than theoretical, depending on substrate & application conditions
Solids by volume± 36% (depending on colour)
Touch dry @ 23 °C± 45 to 60 minutes (depending on applied WFT)
Hard dry @ 23 °C± 4 to 8 hours (depending on applied WFT)
Overcoating intervalWithin 3 to 4 hours
Recommended thinnerGP/QD Thinner for viscosity adjustment and for cleaning
Application
  • Airless spray: preferred (thinning not recommended)
  • Air spray: suitable (if required, thin maximum 10%)
  • Brush / roller: suitable for small areas only (if required, thin maximum 15%)
Substrate conditionsDry and free of any dirt, dust or oily residues; at least 3 °C above dew point; clean sufficiently by sandblasting or with sandpaper

Datasheets

  • SDSSafety data sheet (PDF)
  • Coming soon

    Technical data sheets are moving to a free sign-up

    Soon you'll unlock every Marindec datasheet with one quick sign-up. Until then, contact us and we'll send you the technical data sheet for Transport Enamel+mzap — White 200L.

Frequently asked questions

What is Transport Enamel+mzap — White 200L used for?

This enamel coating provides exceptional durability and corrosion resistance, ensuring long-lasting protection against harsh conditions while enhancing aesthetic appeal.

What thinner should I use with Transport Enamel+mzap — White 200L?

Per the Marindec technical data sheet: GP/QD Thinner for viscosity adjustment and for cleaning.

What film thickness should Transport Enamel+mzap — White 200L be applied at?

The technical data sheet recommends 35 to 50 µm DFT (100 to 140 µm WFT).

What should I know before applying Transport Enamel+mzap — White 200L?

Code 43 is one product: Transport Enamel, called Floor/Stoep Enamel when it is applied to floors, so the Floor / Stoep Enamel technical data sheet applies.

How quickly does Transport Enamel+mzap — White 200L dry?

Per the Marindec technical data sheet: touch dry ± 45 to 60 minutes (depending on applied WFT) and hard dry ± 4 to 8 hours (depending on applied WFT) at 23 °C. Drying times vary with temperature and film thickness.

What coverage does Transport Enamel+mzap — White 200L give?

The Marindec technical data sheet gives a theoretical spread rate of 7.5 m²/litre @ 45 µm DFT. Practical spread is 50 to 70% less than theoretical, depending on substrate & application conditions.

What pack sizes are available?

Transport Enamel+mzap — White 200L is supplied in 200L.