Products / Topcoats

39-901-025 · 25L
SKU39-901-025
Pack sizes25L
System roletopcoat
Finishgloss
Substratesmetal, galvanised iron, previously painted
Environmentsinterior, exterior, industrial
Dry timetouch ± 10 minutes · hard ± 4 hours
Coverage7.35 m²/litre @ 30 µm DFT theoretical; practical 50 to 70% less
Volume solids± 22% (depending on colour)

Fast Dry Enamels — Black 25L

Marindec Product Assistant

We need a quick-drying gloss topcoat for steel machinery in a plant.

This fast-drying enamel coating offers exceptional corrosion resistance, UV protection and durability, ideal for manufacturing, construction industries, ensuring aesthetic appeal and reduced maintenance costs while enhancing performance and sustainability.

Use cases

  • Fast-drying enamel for general industrial and commercial metalwork. Available in dipping grade (for factory dip-line application) and spray grade (for spray application). FDE bronze, silver, and aluminium used for decorative metalwork. Common in steel fabrication, contract painting, and industrial maintenance.

Technical data

From the Marindec technical data sheet for Armourfinish 25 premium fast dry finish coat enamel (39 series), TDS 2/120315. Drying and overcoating times vary with ambient temperature.

TypeMedium build, fast drying, single pack based on modified alkyd resin
Recommended film thickness20 to 45 µm DFT (90 to 200 µm WFT)
Theoretical spread rate7.35 m²/litre @ 30 µm DFT
Practical spread rate50 to 70% less than theoretical, depending on substrate & application conditions
Solids by volume± 22% (depending on colour)
Touch dry @ 23 °C± 10 minutes
Hard dry @ 23 °C± 4 hours
Overcoating intervalWithin 2 hours
Recommended undercoatFast Dry ZPP / ZPPW / ZCW primer, water / solvent borne etch primer, or Universal Under Coat
Recommended thinnerFD / QD Thinner for viscosity adjustment and for cleaning
Application
  • Airless spray: preferred (thinning not recommended)
  • Air spray: suitable (if required, thin maximum 10%)
  • Brush / roller: suitable for small areas only (if required, thin maximum 15%)
  • Dipping: suitable (reduce viscosity to ± 20 seconds Ford Cup 4)
Substrate conditionsDry and free of any dirt, dust or oily residues; at least 3 °C above dew point; clean sufficiently by sandblasting or with sandpaper

Datasheets

  • SDSSafety data sheet (PDF)
  • Coming soon

    Technical data sheets are moving to a free sign-up

    Soon you'll unlock every Marindec datasheet with one quick sign-up. Until then, contact us and we'll send you the technical data sheet for Fast Dry Enamels — Black 25L.

Frequently asked questions

What is Fast Dry Enamels — Black 25L used for?

Fast-drying enamel for general industrial and commercial metalwork. Available in dipping grade (for factory dip-line application) and spray grade (for spray application). FDE bronze, silver, and aluminium used for decorative metalwork. Common in steel fabrication, contract painting, and industrial maintenance.

Which surfaces can Fast Dry Enamels — Black 25L be applied to?

Suitable substrates include metal, galvanised iron, previously painted.

Does Fast Dry Enamels — Black 25L need a primer?

A primer is recommended. The Marindec technical data sheet specifies: Fast Dry ZPP / ZPPW / ZCW primer, water / solvent borne etch primer, or Universal Under Coat. From the Marindec range: Armourprime ZPPW15 fast dry anti corrosive primer, Armouretch EPS15 self etching & fast dry primer or Galvprime 35 lead free galvanized iron primer. On galvanised steel, such as IBR roof sheeting, use Galvanised Iron Primer (Marindec technical team).

What thinner should I use with Fast Dry Enamels — Black 25L?

Per the Marindec technical data sheet: FD / QD Thinner for viscosity adjustment and for cleaning.

What film thickness should Fast Dry Enamels — Black 25L be applied at?

The technical data sheet recommends 20 to 45 µm DFT (90 to 200 µm WFT).

What should I know before applying Fast Dry Enamels — Black 25L?

Fast dry enamel available in dipping and spray grades

How quickly does Fast Dry Enamels — Black 25L dry?

Per the Marindec technical data sheet: touch dry ± 10 minutes and hard dry ± 4 hours at 23 °C. Drying times vary with temperature and film thickness.

What coverage does Fast Dry Enamels — Black 25L give?

The Marindec technical data sheet gives a theoretical spread rate of 7.35 m²/litre @ 30 µm DFT. Practical spread is 50 to 70% less than theoretical, depending on substrate & application conditions.

What pack sizes are available?

Fast Dry Enamels — Black 25L is supplied in 25L.