Products / Primers

13-500-005 · 5L
SKU13-500-005
Pack sizes5L
System roleprimer
Finishnone
Substratesgalvanised iron
Environmentsinterior, exterior, industrial
Dry timetouch ± 2 hours · hard ± 6 hours
Coverage5 m²/litre @ 70 µm DFT theoretical; practical 50 to 70% less
Volume solids± 35%

Galvanised Iron Primer — Yellow 5L

Marindec Product Assistant

We're painting new galvanised IBR roof sheets with Fast Dry Enamel. What goes on first?

This galvanized iron primer offers exceptional durability, corrosion resistance, and aesthetic appeal, enhancing longevity in transportation and electrical applications while improving safety, performance, and energy efficiency across multiple industries.

Use cases

  • Applied to galvanised iron, hot-dip galvanised (HDG) surfaces, zinc-coated steel, pre-galvanised sheeting, security fencing, and steel gates as an adhesion primer before topcoating with enamel. Prevents paint lifting on zinc and galvanised surfaces where standard primers fail to adhere.

Technical data

From the Marindec technical data sheet for Galvprime 35 lead free galvanized iron primer (13 series), TDS 1/111010. Drying and overcoating times vary with ambient temperature.

TypeMedium build, single pack based on modified alkyd resin with environment friendly lead free driers
Recommended film thickness50 to 60 µm DFT (100 to 120 µm WFT)
Theoretical spread rate5 m²/litre @ 70 µm DFT
Practical spread rate50 to 70% less than theoretical, depending on substrate & application conditions
Solids by volume± 35%
Touch dry @ 23 °C± 2 hours
Hard dry @ 23 °C± 6 hours
Overcoating intervalOvernight
Recommended thinnerNot recommended; only if required use FD Thinner. For cleaning, use FD Thinner
Application
  • Airless spray: preferred (thinning not recommended)
  • Air spray: suitable (only if required, thin maximum 5%)
  • Brush / roller: suitable for maximum 100 µm WFT (only if required, thin maximum 5%)
Substrate conditionsDry and free of any dirt, dust or oily residues; at least 3 °C above dew point; clean sufficiently by sandblasting or with sandpaper

Datasheets

  • SDSSafety data sheet (PDF)
  • Coming soon

    Technical data sheets are moving to a free sign-up

    Soon you'll unlock every Marindec datasheet with one quick sign-up. Until then, contact us and we'll send you the technical data sheet for Galvanised Iron Primer — Yellow 5L.

Frequently asked questions

What is Galvanised Iron Primer — Yellow 5L used for?

Applied to galvanised iron, hot-dip galvanised (HDG) surfaces, zinc-coated steel, pre-galvanised sheeting, security fencing, and steel gates as an adhesion primer before topcoating with enamel. Prevents paint lifting on zinc and galvanised surfaces where standard primers fail to adhere.

Which surfaces can Galvanised Iron Primer — Yellow 5L be applied to?

Suitable substrates include galvanised iron.

What thinner should I use with Galvanised Iron Primer — Yellow 5L?

Per the Marindec technical data sheet: Not recommended; only if required use FD Thinner. For cleaning, use FD Thinner.

What film thickness should Galvanised Iron Primer — Yellow 5L be applied at?

The technical data sheet recommends 50 to 60 µm DFT (100 to 120 µm WFT).

What should I know before applying Galvanised Iron Primer — Yellow 5L?

Specifically formulated for galvanised iron surfaces. Customers frequently misspell as 'galvinized iron primer' — both spellings handled in search keywords.

How quickly does Galvanised Iron Primer — Yellow 5L dry?

Per the Marindec technical data sheet: touch dry ± 2 hours and hard dry ± 6 hours at 23 °C. Drying times vary with temperature and film thickness.

What coverage does Galvanised Iron Primer — Yellow 5L give?

The Marindec technical data sheet gives a theoretical spread rate of 5 m²/litre @ 70 µm DFT. Practical spread is 50 to 70% less than theoretical, depending on substrate & application conditions.

What pack sizes are available?

Galvanised Iron Primer — Yellow 5L is supplied in 5L.