| SKU | 40-900-025 |
|---|---|
| Pack sizes | 25L |
| System role | topcoat |
| Finish | gloss to satin |
| Substrates | metal |
| Environments | interior, exterior, industrial |
| Dry time | touch ± 10 minutes (depending on ambient temperature) · hard ± 30 minutes (depending on ambient temperature) |
Quick Dry Enamels Spray — Bright Alu-spray 25L
This specialty coating provides exceptional durability, UV protection and corrosion resistance for construction, with quick drying, excellent adhesion and aesthetic appeal for long-lasting surfaces.
Technical data
From the Marindec technical data sheet for QD Spray SK120 Bright Aluminium RFU (40 series), TDS 4/140626. Drying and overcoating times vary with ambient temperature.
| Type | Low build, fast drying, single pack based on Pet Resin |
|---|---|
| Recommended film thickness | 10 µm |
| Touch dry @ 23 °C | ± 10 minutes (depending on ambient temperature) |
| Hard dry @ 23 °C | ± 30 minutes (depending on ambient temperature) |
| Overcoating interval | Within 2 hours (depending on ambient temperature) |
| Principal use | Economy primer for steel products: excellent adhesion, limited anti-corrosive properties, high opacity |
| Finish | Gloss to satin |
| Specific gravity @ 23 °C | ± 0.868 |
| Shelf life | Minimum 6 months in original sealed packing (cool, dry & shaded) |
| Flash point | Below 22 °C |
| Limitation | Do not expose to rain, water, dew or high humidity after application: extremely moisture sensitive, which can result in film peeling / loss of adhesion (recovery possible after 6 to 8 hours in dry conditions). Contamination can result in poor cure or gel; excessive film thickness can cause gassing. Keep sealed when not in use |
| Recommended primer | Not required (Marindec technical team, 2026-10-19) |
| Recommended thinner | FD Thinner for cleaning |
| Application |
|
| Substrate conditions | Dry and free of any dirt, dust or oily residues; at least 3 °C above dew point; clean sufficiently by sandblasting or with sandpaper |
The data sheet's theoretical spread rate line contains a typo, so no coverage figure is given: ask Marindec for coverage.
Datasheets
Frequently asked questions
What is Quick Dry Enamels Spray — Bright Alu-spray 25L used for?
This specialty coating provides exceptional durability, UV protection and corrosion resistance for construction, with quick drying, excellent adhesion and aesthetic appeal for long-lasting surfaces.
Which surfaces can Quick Dry Enamels Spray — Bright Alu-spray 25L be applied to?
Suitable substrates include metal.
Does Quick Dry Enamels Spray — Bright Alu-spray 25L need a primer?
No — it can be applied direct to a properly prepared substrate.
What thinner should I use with Quick Dry Enamels Spray — Bright Alu-spray 25L?
Per the Marindec technical data sheet: FD Thinner for cleaning.
What film thickness should Quick Dry Enamels Spray — Bright Alu-spray 25L be applied at?
The technical data sheet recommends 10 µm.
What should I know before applying Quick Dry Enamels Spray — Bright Alu-spray 25L?
Keep the fresh film away from rain, water, dew and high humidity: it is extremely moisture sensitive and can peel or lose adhesion.
How quickly does Quick Dry Enamels Spray — Bright Alu-spray 25L dry?
Per the Marindec technical data sheet: touch dry ± 10 minutes (depending on ambient temperature) and hard dry ± 30 minutes (depending on ambient temperature) at 23 °C. Drying times vary with temperature and film thickness.
What pack sizes are available?
Quick Dry Enamels Spray — Bright Alu-spray 25L is supplied in 25L.