Products / Specialty Coatings

40-900-200 · 200L
SKU40-900-200
Pack sizes200L
System roletopcoat
Finishgloss to satin
Substratesmetal
Environmentsinterior, exterior, industrial
Dry timetouch ± 10 minutes (depending on ambient temperature) · hard ± 30 minutes (depending on ambient temperature)

Quick Dry Enamels Spray — Bright Alu-spray 200L

Marindec Product Assistant

We need a quick-drying bright aluminium finish on steel parts in the workshop, without a separate primer.

This Quick Dry Enamel Spray offers rapid drying, exceptional corrosion resistance, and aesthetic versatility, ensuring durability and performance for steel, construction, and manufacturing industries while minimizing downtime.

Technical data

From the Marindec technical data sheet for QD Spray SK120 Bright Aluminium RFU (40 series), TDS 4/140626. Drying and overcoating times vary with ambient temperature.

TypeLow build, fast drying, single pack based on Pet Resin
Recommended film thickness10 µm
Touch dry @ 23 °C± 10 minutes (depending on ambient temperature)
Hard dry @ 23 °C± 30 minutes (depending on ambient temperature)
Overcoating intervalWithin 2 hours (depending on ambient temperature)
Principal useEconomy primer for steel products: excellent adhesion, limited anti-corrosive properties, high opacity
FinishGloss to satin
Specific gravity @ 23 °C± 0.868
Shelf lifeMinimum 6 months in original sealed packing (cool, dry & shaded)
Flash pointBelow 22 °C
LimitationDo not expose to rain, water, dew or high humidity after application: extremely moisture sensitive, which can result in film peeling / loss of adhesion (recovery possible after 6 to 8 hours in dry conditions). Contamination can result in poor cure or gel; excessive film thickness can cause gassing. Keep sealed when not in use
Recommended primerNot required (Marindec technical team, 2026-10-19)
Recommended thinnerFD Thinner for cleaning
Application
  • Airless spray: preferred (thinning not recommended)
  • Air spray: suitable (if required, thin maximum 15%)
  • Brush / roller: suitable for small areas only (if required, thin maximum 15%)
  • Dipping: suitable (ready for use, no dilution required)
  • Apply one or two coats according to the required DFT; ambient temperature preferably above 6 °C
Substrate conditionsDry and free of any dirt, dust or oily residues; at least 3 °C above dew point; clean sufficiently by sandblasting or with sandpaper

The data sheet's theoretical spread rate line contains a typo, so no coverage figure is given: ask Marindec for coverage.

Datasheets

  • SDSSafety data sheet (PDF)
  • Coming soon

    Technical data sheets are moving to a free sign-up

    Soon you'll unlock every Marindec datasheet with one quick sign-up. Until then, contact us and we'll send you the technical data sheet for Quick Dry Enamels Spray — Bright Alu-spray 200L.

Frequently asked questions

What is Quick Dry Enamels Spray — Bright Alu-spray 200L used for?

This Quick Dry Enamel Spray offers rapid drying, exceptional corrosion resistance, and aesthetic versatility, ensuring durability and performance for steel, construction, and manufacturing industries while minimizing downtime.

Which surfaces can Quick Dry Enamels Spray — Bright Alu-spray 200L be applied to?

Suitable substrates include metal.

Does Quick Dry Enamels Spray — Bright Alu-spray 200L need a primer?

No — it can be applied direct to a properly prepared substrate.

What thinner should I use with Quick Dry Enamels Spray — Bright Alu-spray 200L?

Per the Marindec technical data sheet: FD Thinner for cleaning.

What film thickness should Quick Dry Enamels Spray — Bright Alu-spray 200L be applied at?

The technical data sheet recommends 10 µm.

What should I know before applying Quick Dry Enamels Spray — Bright Alu-spray 200L?

Keep the fresh film away from rain, water, dew and high humidity: it is extremely moisture sensitive and can peel or lose adhesion.

How quickly does Quick Dry Enamels Spray — Bright Alu-spray 200L dry?

Per the Marindec technical data sheet: touch dry ± 10 minutes (depending on ambient temperature) and hard dry ± 30 minutes (depending on ambient temperature) at 23 °C. Drying times vary with temperature and film thickness.

What pack sizes are available?

Quick Dry Enamels Spray — Bright Alu-spray 200L is supplied in 200L.