Marindec Paints| SKU | 35-102-005 |
|---|---|
| Pack sizes | 5L |
| System role | marking |
| Finish | flat |
| Substrates | concrete, masonry |
| Environments | exterior |
| Dry time | non pick-up less than 15 minutes · hard 45 minutes |
| Coverage | 4–5 m²/litre for 150 µm DFT theoretical |
| Volume solids | ± 46% (volume content) |
Fast Drying Road Marking SANS 731-1 — White 5L
This fast-drying road marking product offers quick application, high visibility, abrasion resistance, and UV protection, ensuring durability and safety in transportation and municipal infrastructure while enhancing urban aesthetics.
Use cases
- Applied to asphalt and concrete road surfaces for traffic lane lines, pedestrian crossings, stop lines, and road symbols. Used by road construction contractors, civil engineering firms, and municipalities. Compliant with SANS 731-1. Solvent-based formulation — Marindec does not stock water-based road marking paint (Plascon WTP/UTP equivalent). White and yellow are the most commonly requested colours.
Technical data
From the Marindec product data sheet for Road Marking Paint.
| Type | Modified alkyd based road marking paint, suitable for bituminous roads |
|---|---|
| Recommended film thickness | New road: 150 µm DFT; re-coat: 75 µm DFT |
| Theoretical spread rate | 4–5 m²/litre for 150 µm DFT |
| Solids by volume | ± 46% (volume content) |
| Non pick-up time | Less than 15 minutes |
| Hard dry | 45 minutes |
| Application |
|
| Substrate conditions | Bituminous surface must be clean, dry and free from gravel |
Datasheets
Frequently asked questions
What is Fast Drying Road Marking SANS 731-1 — White 5L used for?
Applied to asphalt and concrete road surfaces for traffic lane lines, pedestrian crossings, stop lines, and road symbols. Used by road construction contractors, civil engineering firms, and municipalities. Compliant with SANS 731-1. Solvent-based formulation — Marindec does not stock water-based road marking paint (Plascon WTP/UTP equivalent). White and yellow are the most commonly requested colours.
Which surfaces can Fast Drying Road Marking SANS 731-1 — White 5L be applied to?
Suitable substrates include concrete, masonry.
Does Fast Drying Road Marking SANS 731-1 — White 5L need a primer?
No — it can be applied direct to a properly prepared substrate.
What film thickness should Fast Drying Road Marking SANS 731-1 — White 5L be applied at?
The technical data sheet recommends New road: 150 µm DFT; re-coat: 75 µm DFT.
What should I know before applying Fast Drying Road Marking SANS 731-1 — White 5L?
Fast drying road marking paint compliant with SANS 731-1. Plascon WTP1/WTP2/UTP1/UTP2 (water-based) is frequently requested but out of scope — Marindec is solvent-based only. Route water-based road marking requests to sales.
How quickly does Fast Drying Road Marking SANS 731-1 — White 5L dry?
Per the Marindec product data sheet: non pick-up less than 15 minutes and hard dry 45 minutes. Drying times vary with temperature and film thickness.
What coverage does Fast Drying Road Marking SANS 731-1 — White 5L give?
The Marindec product data sheet gives a theoretical spread rate of 4–5 m²/litre for 150 µm DFT.
What pack sizes are available?
Fast Drying Road Marking SANS 731-1 — White 5L is supplied in 5L.