Products / Specialty Coatings

41-701-025 · 25L
SKU41-701-025
Pack sizes25L
System roletopcoat
Finishhammertone
Substratesmetal, galvanised iron, previously painted
Environmentsinterior, exterior, industrial
Dry timetouch ± 15 minutes · hard ± 4 hours
Coverage10.7 m²/litre @ 30 µm DFT theoretical; practical 50 to 70% less
Volume solids± 32% (depending on colour)

Fast Dry Enamels Hammertone Finish — Silver 25L

Marindec Product Assistant

We want a hammered-metal finish on steel enclosures outdoors.

This specialty coating combines durability, aesthetic appeal and environmental protection, offering superior performance in manufacturing and construction through enhanced longevity and reduced maintenance costs.

Technical data

From the Marindec technical data sheet for Armourtone 35 Hammer premium fast dry finish enamel (41 series), TDS 2/140221. Drying and overcoating times vary with ambient temperature.

TypeReady for use, medium build, fast drying, single pack based on modified alkyd resin with hammer additive and metallic pigments
Recommended film thickness25 to 35 µm DFT (80 to 110 µm WFT)
Theoretical spread rate10.7 m²/litre @ 30 µm DFT
Practical spread rate50 to 70% less than theoretical, depending on substrate & application conditions
Solids by volume± 32% (depending on colour)
Touch dry @ 23 °C± 15 minutes
Hard dry @ 23 °C± 4 hours
Overcoating intervalWithin 2 hours
Recommended undercoatFast Dry ZPP / ZPPW / FPW primer, water / solvent borne etch primer, or Universal Under Coat
Recommended thinnerFDE Thinner for cleaning
ThinningNot recommended: the hammer effect will deteriorate if thinned
Application
  • Air spray: recommended (thinning not recommended)
  • Airless spray: suitable (thinning not recommended)
  • Brush / roller: suitable for small areas only (thinning not recommended)
Substrate conditionsDry and free of any dirt, dust or oily residues; at least 3 °C above dew point; clean sufficiently by sandblasting or with sandpaper

Datasheets

  • SDSSafety data sheet (PDF)
  • Coming soon

    Technical data sheets are moving to a free sign-up

    Soon you'll unlock every Marindec datasheet with one quick sign-up. Until then, contact us and we'll send you the technical data sheet for Fast Dry Enamels Hammertone Finish — Silver 25L.

Frequently asked questions

What is Fast Dry Enamels Hammertone Finish — Silver 25L used for?

This specialty coating combines durability, aesthetic appeal and environmental protection, offering superior performance in manufacturing and construction through enhanced longevity and reduced maintenance costs.

Which surfaces can Fast Dry Enamels Hammertone Finish — Silver 25L be applied to?

Suitable substrates include metal, galvanised iron, previously painted.

Does Fast Dry Enamels Hammertone Finish — Silver 25L need a primer?

A primer is recommended. The Marindec technical data sheet specifies: Fast Dry ZPP / ZPPW / FPW primer, water / solvent borne etch primer, or Universal Under Coat. From the Marindec range: Armourprime ZPPW15 fast dry anti corrosive primer, Armourprime FPW15 fast dry primer or Armouretch EPS15 self etching & fast dry primer.

What thinner should I use with Fast Dry Enamels Hammertone Finish — Silver 25L?

Per the Marindec technical data sheet: FDE Thinner for cleaning.

What film thickness should Fast Dry Enamels Hammertone Finish — Silver 25L be applied at?

The technical data sheet recommends 25 to 35 µm DFT (80 to 110 µm WFT).

How quickly does Fast Dry Enamels Hammertone Finish — Silver 25L dry?

Per the Marindec technical data sheet: touch dry ± 15 minutes and hard dry ± 4 hours at 23 °C. Drying times vary with temperature and film thickness.

What coverage does Fast Dry Enamels Hammertone Finish — Silver 25L give?

The Marindec technical data sheet gives a theoretical spread rate of 10.7 m²/litre @ 30 µm DFT. Practical spread is 50 to 70% less than theoretical, depending on substrate & application conditions.

What pack sizes are available?

Fast Dry Enamels Hammertone Finish — Silver 25L is supplied in 25L.